87
OPERATION
19.3 Mechanical side locks
Operation_Pic_number:1
The lower links are locked using the left and right
levers (A).
Mounted implement rigid.
● Move lever up.
Mounted implement with lateral movement.
● Move lever down.
Fig.192
19.4 Top link
Operation_Pic_number:1
● Adjust length by turning handle (A).
Both threads must be of equal length; securing
clamp must clip over peg (B).
Attaching at tractor
Operation_Pic_number:1
Can be fastened to three bores (for better
implement adaptation and for increasing lifting
force).
Increased lifting power, reduced lifting
height.
● Fit top link into the upper hole.
Reduced lifting power, increased lifting
height.
● Fit top link in low position.
Fig.193
Fig.194
To Next Page
Loading...
