FENDT 938 Vario MT - Fire Extinguisher; Public Road Transportation

explosive. Repair such components in a well ventilated area away from open flames or sparks.
Inspect al
l lines and hoses for wear or for deterioration and replace if necessary.
Route hoses correctly. Lines and hoses must have sucient support and secure clamps. Tighten all
connections to recommended torque.
1.1.30 Fire extinguisher
An optional (1) bracket can be installed on the right
front frame rail. T
he bracket is holds a 4.5 kg fire
extinguisher. Make sure that all clamps, guards,
and heat shields are installed correctly. Correct
installation prevents vibration, abrasions and too
much heat during the machine operation.
Do not weld the bracket onto the cab ROPS frame
to install the fire extinguisher. Do not drill holes in
the cab ROPS frame to attach the fire extinguisher.
GUID-E30F5D1A-50FD-4D6D-9D0E-9385BE099107-high.jpg [High]
Fig. 1
7
Make sure that a fire extinguisher (1) is available
and know the operation. Examine and service the
fire extinguisher regularly. Obey the
recommendations on the instruction plate.
GUID-C7689359-B5FD-4447-AA0C-F06C1C065EF4-high.jpg [High]
Fig. 1
8
1.1.31 Public road transportation
Always walk around and visually examine the machine before moving on a public road. As a warning to
ot
hers in the area, honk the horn two times before starting engine. Do a check for damage and/or defective
components that can make a dangerous condition. Make sure all machine systems operate correctly
including (but not limited to):
• front road lamps
• tail and brake lamps
• amber hazard lights
• parking brake
• horn
• windshield wiper and washer
• rear view mirrors
• etc.
Repair or replace a component not in correct operating order.
Do not drive at a speed causing machine to lose control.
GUID-6722D2A5-CFD1-4EC0-9681-E8C8ED018312 [V2]
GUID-83333B29-DD08-4E83-9040-BB07F2BF96DE [V4]
1. General
Rubber Track Tractor 1
-15
79037495A