IMPORTANT: Use of high sulphur fuel in Select
ive Catalytic Reduction (SCR) engines and cooled external
Exhaust Gas Recirculation (EGR) engines will cause damage to the aftertreatment system and cause the
machine to loose performance. If you use high quantity sulphur fuels the warranty will be removed from
the engine and aftertreatment system.
Permitted sulphur quantities
Emission level Fuel injection
syst
em
Aftertreatment
system (Diesel
Oxidation
Catalyst (DOC),
Selective
Catalytic
Reduction (SCR),
Exhaust Gas
Recirculation
(EGR))
Diesel Particulate
Filter (DPF)
Maximum
permitted
sulphur content
Stage V Common rail Yes Yes 10 mg/kg
[1]
Tier 4 Final, Stage
IV
Common rail Yes No 15 mg/kg
Tier 4 Interim,
Stage IIIB
Common rail Yes No 15 mg/kg
Tier 3, Stage IIIA Common rail Yes No 15 mg/kg or 500
mg/kg
[2]
Mechanical Yes No
Tier 2, Stage II Common rail Yes No 15 mg/kg or 500
mg/kg
[2]
Common rail No No 2000 mg/kg
Mechanical No No 2000 mg/kg
Tier 0, Stage 0 Common rail No No 2000 mg/kg
Mechanical
[1]
Within the European Union fuel with sulphur content not greater than 10 mg/kg (20 mg/kg at point of final
distribution) shall be used.
[2]
If the engine does not have a Selective Catalytic Reduction (SCR) system or a cooled external Exhaust Gas
Recirculation (EGR) system, the maximum permitted sulphur quantity is 500 mg/kg.
Cetane number
The cetane number must be a minimum of 45. We recommend a cetane number more than 47, specially
for temperatures less than -20°C (-4°F) and elevations above 1500 m (5000 ft) from the sea level.
Biodiesel blends
1st generation biodiesel blends
In European Union use of 1st generation biodiesel, which has less than 8% Fatty Acid Methyl Esters
(FAME) / Fatty Acid Mono-Alkyl Esters (FAAE), is approved.
In other areas use of 1st generation biodiesel, which has less than 10% Fatty Acid Methyl Esters (FAME) /
Fatty Acid Mono-Alkyl Esters (FAAE), is approved.
GUID-AD5AADED-73BD-40DC-8D56-B22AE0A590D7 [V6]
1. General
1-40 R
ubber Track Tractor
79037495A
To Next Page
Loading...
