1.6.4 Maintenance to be made at 400 - 800 hours intervals ........................ 1
-28
1.6.4.1 Change engine oil .........................................1-28
1.6.4.2 Change oil filter .......................................... 1-28
1.6.4.3 Update the engine software ................................. 1-29
1.6.4.4 How to recognize an engine with hydraulic lash adjusters ............ 1-29
1.6.5 Change fuel filters .................................................. 1-30
1.6.6 Bleed the fuel system ............................................... 1-31
1.6.7 Maintenance to be made at 4000 hours intervals ........................... 1-32
1.6.7.1 Check turbocharger play and check that the intercooler cell is clean .... 1-32
1.6.8 Maintenance to be made once a year or 1200 hours ......................... 1-32
1.6.8.1 Selective Catalytic Reduction (SCR) system maintenance ............ 1-32
1.6.8.2 Replace the main filter and the inlet filter of the supply module ........ 1-33
1.6.9 Maintenance to be made every two years .................................1-35
1.6.9.1 Change coolant .......................................... 1-35
1.6.10 Additional maintenance instructions ..................................... 1-36
1.6.10.1 Before the cold season ..................................... 1-36
1.6.10.2 Tightening torques ........................................ 1-36
1.6.10.3 Coolant quality requirements ................................ 1-38
1.6.10.4 Fuel quality requirements ................................... 1-38
1.6.10.5 Lubricating oil quality requirements ............................ 1-43
1.7 Technical data ......................................................... 1-44
1.7.1 Torque specifications ................................................ 1-44
1.7.1.1 Torque specifications ...................................... 1-44
1.7.1.2 Constant torque hose clamps ................................ 1-44
1.7.1.3 Metric fasteners ..........................................1-44
1.7.1.4 Inch fasteners ........................................... 1-46
1.7.2 Machine specifications .............................................. 1-50
1.7.2.1 General dimensions ....................................... 1-50
1.7.2.2 Rear view dimensions ..................................... 1-51
1.7.2.3 Shipping weights ......................................... 1-51
1.7.2.4 Machine specifications ..................................... 1-53
1.7.2.5 Noise vibration level ....................................... 1-54
1.7.3 Engine specifications ................................................1-55
Table of contents
1-2 R
ubber Track Tractor
79037495A
Find manuals at https://best-manuals.com
To Next Page
Loading...
Need help?
General
