Chapter 3
16 Fendt Vario 700, 800, and 900 Series SmarTrax™ MD Installation Manual
FIGURE 15. Anti-Rotation Pin Installation Locations
1. Determine the anti-rotation pin (P/N 107-4001-004) installation location on the mechanical drive (P/N 063-
4001-010) based on the anti-rotation bracket installation location.
2. Screw the anti-rotation pin into the mechanical drive’s casing.
FIGURE 16. Anti-Rotation Pin Installed in Bracket Assembly
3. Insert the anti-rotation pin into the installed flanged bearing (P/N 325-0000-036) on the anti-rotation bracket
assembly.
Anti-Rotation Brackets
Installed on Right Side of
Steering Column
Anti-Rotation Brackets
Installed on Left Side of
Steering Column
Anti-Rotation Pin Inserted
into Anti-Rotation Bracket
Assembly
To Next Page
Loading...
