Object Nm
Crankshaft nut 1000
+100Nm[1]
Crankshaft pulley screws, M14 200
Flywheel screws 200
Flywheel housing screws:
• M12 • 150
• M10 • 80
Idler gear screws :
• M14 • 180
• M8 • 32
Small idler gear screws (shaft, 2 pcs): M8 45
Small idler gear screws (thrust ring): M8 32
Camshaft gear nut 200
Rocker arm shaft bracket screw and nuts 45
Valve cover screws 25
Valve cover frame screws 25
Piston cooling valve 30
Oil pump retaining screws 50
Oil sump drain plug M18 80
Oil cooler connecting piece 60
Coolant pump pulley screw
• M10 • 50
• M12 • 80
Coolant pump pulley nut M16 120
Belt tightener screw 48
Exhaust manifold screws 50
Injector retaining screw See the correct tightening procedure from the work
instructions.
Injector wire nuts (M4) 1,5
High pressure pump gear nut 80
Pre-filter water detector 6
Compressor gear nut (1 and 2 cylinder) 160 (LH thread)
[1]
See for more information, how to tighten the crankshaft hub nut.
1. General
Rubber Track Tractor 1-39
79037272A
To Next Page
Loading...
