Feniex QUAD QSM-8101 - User Manual

Quad Surface Mount Instruction Manual
1.800.615.8350 / feniex.com
Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the
United States and other countries preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the
exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted
material of Feniex and its licensors contained herein or in the Feniex products described in this Price List may not be copied, reproduced,
distributed, merged or modied,transmitted, transcribed, stored in retrieval system or translated into any language or computer language, in any
form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S.
Patent & Trademark Oce.
QUAD SURFACE MOUNT
QSM-8101
Equipment Dimensions
pp. 03
Specifications
pp.03
Wiring Diagram
pp.04
Feniex University
feniexuniversity.com

Summary

Safety Regulations and Warranty

Safety Regulations

Provides essential guidelines for safe product installation and operation to prevent damage or injury.

Warranty Coverage

Details the warranty period for various Feniex products from the manufacturing date.

Service After Warranty Expiration

Information on obtaining service for products after their warranty has expired.

Important Installation Warning

Caution that using non-factory screws or mounting brackets may void warranty coverage.

Copyright and Legal Notices

Legal protection of Feniex material, prohibiting unauthorized copying or distribution.

Product Specifications

Dimensions

Specifies the physical dimensions of the product as 1.17" x 0.88" x 5.22".

Warranty Period

States the product warranty duration as 5 years.

Voltage Requirements

Indicates the operating voltage range for the product is 10-18 Volts DC.

Current Draw

Specifies the product's electrical current consumption as 1 Amp.

Equipment Dimensions Diagram

Visual representation showing the product's physical dimensions.

Feniex University Resource

Promotes instructional videos available at Feniex University for product features.

Wiring Diagram and Patterns

Wiring Connections

Details the function of each wire color (Red, Black, Yellow, White, Green, Blue).

Setting Colors

Instructions on how to set the desired color for the light output.

Flash Patterns

Lists and describes the 14 available flash patterns for the product.

Syncing Flash Patterns

Procedure for synchronizing multiple Quad products' flash patterns.

Alternating Flash Patterns

Method for setting up leader and follower units for alternating flash patterns.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

The Feniex Quad Surface Mount, model QSM-8101, is a versatile lighting device designed for various applications, likely in emergency or warning vehicle systems, given the context of "Feniex" products often associated with such uses. This instruction manual provides comprehensive guidance on its installation, operation, and maintenance, ensuring safe and effective use.

Function Description

The Quad Surface Mount primarily functions as a warning or auxiliary light, capable of displaying a variety of flash patterns and colors to enhance visibility and signal intent. Its core purpose is to provide a highly visible light output, which can be customized to suit different operational requirements. The device is designed to be surface-mounted, making it suitable for discreet or prominent placement on vehicles or other surfaces.

The lighting unit features multiple LEDs, arranged to deliver a powerful and focused light beam. The ability to change colors and flash patterns allows for adaptation to diverse scenarios, such as emergency response, construction, or utility work. The device supports synchronization with other Quad products, enabling coordinated lighting displays across multiple units, which is crucial for creating cohesive and impactful visual warnings.

Usage Features

The Quad Surface Mount offers a range of features that enhance its usability and adaptability:

• Wiring Diagram and Functions: The manual provides a clear wiring diagram, detailing the function of each wire:

  • Red (12V+, Mode 1): Activates the first mode of operation.
  • Black (12V-, Ground): Provides the necessary ground connection for the device.
  • Yellow (12V+, Mode 2): Activates the second mode of operation.
  • White (12V+, Mode 3): Activates the third mode of operation.
  • Green (12V+, Color Change): Used to cycle through and set the desired color of the light.
  • Blue (12V-, Sync/Pattern): Facilitates synchronization with other units and allows for cycling through flash patterns.

• Setting Colors: The color of the light can be easily changed by holding the green wire to 12V+ positive for 3 seconds, which turns the light steady blue. Subsequent momentary taps of the green wire to 12V+ positive will cycle through the available colors. A crucial note advises setting the pattern first and then the color, especially when dealing with patterns 12-14 (brake pop, tail 10%, and steady-on), as these patterns may default to one of the four Quad colors regardless of the initial color setting.

• Syncing Flash Patterns: To synchronize multiple Quad products, the blue sync wires of the units to be synced are connected. Holding the blue sync wire to 12V- ground for 3 seconds resets the flash pattern to "single-slow." Momentarily tapping the blue wire to 12V- ground then cycles through the available flash patterns. This feature is vital for creating unified and effective warning signals across multiple lights.

• Alternating Flash Patterns: The device also supports alternating flash patterns, which is useful for creating dynamic visual alerts. By connecting the blue sync wires of the Quad products and holding the blue sync wire to 12V- ground for 3 seconds, the lights will turn a steady blue for the designated leader unit and red for the follower unit. This allows for a clear distinction between units in an alternating sequence.

• Flash Pattern Options: The manual lists 14 distinct flash patterns, providing a wide array of choices for different signaling needs:

  1. Single Slow
  2. Single Fast
  3. Single Combo
  4. Dual Slow
  5. Dual Fast
  6. Dual Combo
  7. Triple Slow
  8. Triple Fast
  9. Triple Combo
  10. Attack 1
  11. Attack 2
  12. Break Pop
  13. Tail 10%
  14. Steady On 100%

• Feniex University Resources: The manual highlights "Feniex University" as a valuable resource for users. This platform offers instructional videos that provide an in-depth look at the product's features and functions, aiding users in understanding and maximizing the device's capabilities. This educational support underscores Feniex's commitment to user empowerment and product comprehension.

Maintenance Features

While the manual does not explicitly detail routine maintenance procedures for the Quad Surface Mount, it provides crucial information related to installation and warranty that indirectly contribute to the device's longevity and proper functioning:

• Safety Regulations for Installation: Proper installation is paramount for the device's performance and lifespan. The manual emphasizes:

  • Expertise: Good knowledge of automotive systems, electronics, and procedures is required for installation.
  • Drilling Precautions: Care must be taken to avoid damaging vital vehicle components when drilling holes for installation. All sides of the mounting surface should be checked.
  • Air Bag Interference: The product must not be installed in a way that interferes with air bag deployment, as this could compromise safety and lead to serious injury. The installer assumes full responsibility for correct installation.
  • Mounting Surface Preparation: The mounting surface should be cleaned before installation, especially when using tape, brackets, magnets, Velcro, or suction cups, to ensure a secure attachment.
  • Grounding: The product's ground wire must be connected directly to the Negative (-) battery post for effective use, highlighting the importance of a stable electrical connection.
  • Wiring Guidelines: Following all provided wiring guidelines is essential to guarantee a long lifespan and productivity, and failure to do so may damage the product.

• Warranty Information: Feniex Industries offers a comprehensive warranty for its products. While some products have a 2-year warranty, all other products, including the Quad Surface Mount, are warrantied for 5 years from the manufacturing date. This extended warranty period suggests confidence in the product's durability and provides assurance to the user.

• Service After Expiration: Feniex Industries continues to provide service for all products even after the warranty expires. This commitment to long-term support ensures that users can maintain their devices for an extended period, reducing the need for premature replacements.

• Customer Support: For any warranty issues or service needs, customers are directed to contact Feniex customer support at 1.800.615.8350 or visit their website. A Return Merchandise Authorization (RMA) number is required for product returns for repair or replacement, streamlining the service process.

• Warning on Non-Factory Components: A critical warning states that utilizing non-factory screws and mounting brackets may result in the loss of warranty coverage. This emphasizes the importance of using approved components to maintain the product's integrity and ensure warranty validity.

In summary, the Feniex Quad Surface Mount QSM-8101 is a robust and customizable lighting solution designed for demanding applications. Its user-friendly wiring, diverse flash patterns, and color-changing capabilities make it highly adaptable. The detailed safety regulations and comprehensive warranty information provided in the manual underscore Feniex's commitment to product quality, user safety, and long-term customer satisfaction.

Feniex QUAD QSM-8101 Specifications