◎Dual rotary switches allow free adjustment of the brightness and color temperature.
◎360° rotary handle makes all-around lighting possible.
◎Lantern handle can be attached to magnetic metal surfaces.
◎USB Type-C charging port features charging indication and low-voltage warning.
◎Threaded tripod socket for directional illumination.
◎Front case is made of high-quality aluminum alloy material, lightweight and durable.
◎Size: 4.32'' x 1.56'' x 3.61''/109.8 x 39.6 x 91.7 mm.
◎Weight: 10.58 oz/300 g (including battery).
Operating Instructions
The top Rotary Switch A is for brightness adjustment and the Rotary Switch B is for color
temperature selection, the top electronic switch is for output selection of red light mode and
mode switching.
On/off
On: with the lantern switched off, rotate the Switch A clockwise or long press the top electronic
switch to turn on the lantern.
Off: with the lantern switched on, rotate the Switch A counterclockwise to the OFF state or long
press the top electronic switch to turn off the lantern.
Mode Switching
The lantern has four modes: Floodlight mode, Spotlight mode, Spot-and-floodlight mode, and
Red light mode.
1. With the lantern switched off, rotate the Switch A clockwise to turn on the lantern and enter
the Floodlight mode, single click the top electronic switch to cycle through Floodlight
mode→Spotlight mode→Spot-and-floodlight mode.
2. With the lantern switched off, press and hold the top electronic switch for 0.5 seconds to turn
on the lantern and enter the Red light mode.
Note: the Red light mode cannot be operated with other modes simultaneously.
Output Selection
1. In Floodlight mode, Spotlight mode or Spot-and-floodlight mode:
To Next Page
Loading...