To Next PageTo Next Page
Need help?Do you have a question about the Ferm ATM1051 and is the answer not in the manual?
Explains hazard symbols and provides general safety points for operation.
Details air pressure, hose, coupling, regulator specifications, and operating pressure limits.
Step-by-step guide on inserting fasteners into the magazine and reconnecting the air hose.
Covers pre-operation checks, basic trigger activation, and clearing jammed nails.
Recommends using original parts for replacements to maintain performance.
Procedure to verify the air nailer's functionality after maintenance or checks.
Explains hazard symbols and provides general safety points for operation.
Details air pressure, hose, coupling, regulator specifications, and operating pressure limits.
Step-by-step guide on inserting fasteners into the magazine and reconnecting the air hose.
Covers pre-operation checks, basic trigger activation, and clearing jammed nails.
Recommends using original parts for replacements to maintain performance.
Procedure to verify the air nailer's functionality after maintenance or checks.
General| Power Source | Pneumatic |
|---|---|
| Magazine Capacity | 100 nails |
| Nail Type | Brad nails |
| Fastener Type | Nails |
| Nail Length | 15 - 50 mm |
| Fastener Length | 5/8" - 2" (16mm - 50mm) |
| Weight | 1.4 kg |
