Ferrari 250 gt/e pininfarina coupe 2-2 User Manual

Specifications for engine cylinders, arrangement, bore, stroke, displacement, compression, and power.

Specifications for chassis wheel base, length, width, height, tracks, turning circle, weight, fuel/oil consumption, speed, tyres, and electrical system.

Identifies and describes ignition, revolution counter, and oil pressure gauge.

Details speedometer, temperature gauges, fuel indicator, clock, and various control switches.

Details initial running-in procedures and speed limits for the first 2000 miles.

Instructions for starting the engine, including choke usage and starter operation.

Outlines oil change intervals, cylinder head nut checks, and steering adjustments during break-in.

Provides detailed steps for cold and warm engine starting.

Details lubrication tasks for every 300, 2500, and 5000 miles.

Explains engine lubrication system, oil level checks, and pressure regulation.

Instructions for changing the oil filter cartridge bodies every 2500 miles.

Describes the engine's timing system, camshafts, valves, and rockers.

Details how to set valve clearances using proper tools and shims.

Explains how to check engine timing using flywheel and camshaft markings.

Details how to adjust the timing chain tensioner and related warnings.

Describes the mechanical and electric fuel pumps and causes of fuel starvation.

Identifies the Weber carburettors and provides adjustment data.

Outlines the steps and equipment needed to balance the carburettors.

Explains how to use a synchroniser for carburettor adjustment and tuning confirmation.

Covers ignition system components, firing order, and distributor type.

Explains how to set the contact breaker gap and maintain contacts.

Details static and automatic ignition timing checks for both banks.

Details cleaning, checking, and changing spark plugs.

Explains water circulation, pump, and thermostat operation and checks.

Instructions for checking radiator level, flushing the system, and refilling.