Ferrari 365 GTB/4 User Manual

Details concerning vehicle identification numbers and particulars.

Technical specifications and data related to the engine.

Information on fuel, oil, and water levels and replenishment.

Specifications and details regarding the vehicle's chassis.

Key performance figures and data for the vehicle.

Explanation of dashboard instruments and primary controls.

Guidelines for the initial period of vehicle use and break-in.

Step-by-step instructions for starting the engine.

Operation and adjustment of the heating and ventilation systems.

Procedure for opening the engine hood.

Information regarding the car doors and seating arrangement.

How to safely lift the vehicle using a jack.

Proper methods for washing the vehicle.

Operation of the ignition switch and steering lock.

Guidelines and recommendations for driving the vehicle.

Operation and use of the vehicle's air conditioning.

Procedure for opening and closing the rear luggage lid.

Information and usage of the vehicle's seat belts.

Steps for changing a vehicle wheel.

Instructions and recommendations for parking the car.

Scheduled maintenance tasks related to lubrication.

Details and procedures for the engine oil cooling system.

Information regarding engine oil pressure specifications.

Warning and guidance on using oils not specified by the manufacturer.

Scheduled maintenance tasks for the engine.

Procedure for adjusting the valve timing.

Procedure for checking and adjusting valve clearances.

Instructions for adjusting the engine timing chain.

Procedures for adjusting and tuning the carburetors.

Information on the vehicle's gas recycling system.

Details on sparking plugs and their maintenance.

Procedures for maintaining the engine's cooling circuit.

How to check and adjust the belt tension for the alternator and compressor.

Details and maintenance of the ignition system.

Detailed steps for draining and refilling engine oil.

Information and procedures related to the clutch system.

Details and maintenance of the vehicle's drive shafts.

Components and procedures for the rear suspension.

Details and operation of the vehicle's steering system.

Information on the vehicle's braking system components.

Procedure for replacing worn brake pads.

Instructions for changing wheel positions and tire types.

Technical details of the gearbox and differential.

Components and procedures for the front suspension.

Details and maintenance of the shock absorber system.

Information on vehicle alignment and stabilization settings.

Details and specifications for the vehicle's tires.

Theoretical braking distances under various test conditions.

Overview of the vehicle's electrical equipment.

Details and maintenance for the vehicle battery.

Information on the vehicle's lighting components.

Schematic representation of the vehicle's electrical wiring.

Details on the alternator and starter motor.

Information on valves and fuse types used in the electrical system.

Procedure for engaging the clutch and moving off.

Explanation of gear lever positions.

Safety advice and precautions during vehicle operation.

Specific operating advice for winter conditions.

Recommendations for antifreeze concentration and type.

Details on the radiator and oil system components.

Information on the vehicle's expansion tank.

How the thermostatic valve controls coolant flow.

Information about the electric cooling fans.

Instructions on operating the electric ventilation fans.

Instructions for operating the air conditioning controls.

Diagram illustrating the air conditioning system components.

Procedure for releasing the engine bonnet.

Details on bonnet supports and the safety catch.

Procedure for opening the luggage compartment lid.

Lever for operating the fuel filler cap.

Emergency opening mechanism for the fuel filler cap.

Technical specifications for Weber carburetors.

Data and settings for carburetor adjustment.

Recommendations for engine oil types and viscosity.

Details on lubrication points for the chassis.

Overview of primary maintenance tasks and intervals.

Schedule of maintenance operations covered by warranty.

Procedure for adjusting engine valve clearances.

Specifications for valve opening and closing times.

Explanation of how the hydraulic brake system functions.

Details on the brake fluid reservoir and its maintenance.

Procedure for bleeding air from the brake system.

Details on the clutch plate type and its operating mechanism.

Information on the clutch release bearing.

Description of the gearbox and differential unit.

Procedure for checking the gearbox oil level.

Table of final drive ratios for each gear.

Details on the drive shaft and its components.

Information on lubrication for the semi-axles.

Identification of front suspension parts.

Details on front suspension geometry settings.

How to set suspension with static vehicle load.

Vehicle geometry settings for static load conditions.

Identification of rear suspension parts.

Details on rear suspension geometry settings.

Information on shock absorber settings and specifications.

Details on the steering box and its mechanism.

Procedure for adjusting the steering box play.

Procedure for checking and adjusting vehicle alignment.

Step-by-step guide for replacing brake pads.

Procedure for static and dynamic wheel balancing.

Recommended tire pressures for front and rear tires.

Recommendations for tire rotation and replacement.

Diagram showing braking distances based on deceleration.

Details on the starter motor's function and maintenance.

Identification of lighting system components.

Diagram of the fuse box and its layout.