FERRI MT Series - Page 3

MT Owners Manual
1
CONTENTS
GENERAL INFORMATION section 1 page 2
• Introduction - Goal of the manual section 1.1 page 2
• Identifying the machine section 1.2 page 2
• Spare parts section 1.3 page 2
TECHNICAL FEATURES section 2 page 3
• General Description of the Shredder section 2.1 page 3
• Technical Specifications section 2.2 page 4
• Noise section 2.3 page 4
• Working Positions section 2.4 page 4
• Versions of the Machine section 2.5 page 5
• Optional Equipment section 2.6 page 5
SAFETY RULES section 3 page 6
• General Safety Rules section 3.1 page 6
• Safety Rules Concerning the Hydraulic System section 3.2 page 6
• Safety Rules Concerning Road Traffic section 3.3 page 7
• List of Guards Fitted to the Machine section 3.4 page 6
• Description and Location of Safety Decals section 3.5 page 7
INSTRUCTIONS FOR INSTALLATION AND HANDLING section 4 page 8
• Lifting and Unloading section 4.1 page 8
• Attachment to and Detachment from the Tractor section 4.2 page 8
• Attaching the PTO Shaft section 4.3 page 9
• Asembling Separate Components section 4.4 page 6
ADJUSTMENT AND SETTING UP section 5 page 11
• Regulating the Height of Cut section 5.1 page 11
• Adjusting Belt Tension section 5.2 page 11
• Adjusting Roller and Rear Bonnet section 5.3 page 6
• 3 Point Linkage Offset section 5.4 page 6
USE AND OPERATING RULES section 6 page 12
• Starting section 6.1 page 12
• Working Speed section 6.2 page 12
• Transport Position section 6.3 page 12
MACHINE MAINTENANCE section 7 page 13
TROUBLE SHOOTING CHART section 8 page 14
REPLACING PARTS section 9 page 15
• Flails Replacement section 9.1 page 15
• Belts Replacement section 9.2 page 15
• Pipe Replacement section 9.3 page 11
DEMOLITION, DIFFERENTIATED DIVISION AND DISPOSAL section 10 page 14