Need help?Do you have a question about the Ferroflex Aluminum Rolling Up High Speed Door and is the answer not in the manual?
Details the door's vertical high-speed operation, mechanism, and frame.
Details the MATRIX 6 electrical control box, its homologation, and technical data.
Provides technical specifications for the MATRIX 6 control box, including voltage, dimensions, and protection.
Details operating modes, inputs, and status indicators for the door's control system.
Explains the self-test procedure for photocell and electrical control box for security.
Describes the motoreductor's placement, function, and protection features.
Lists key technical specifications like opening speed, closure speed, power supply, and blade material.
Illustrates the door components with numbered labels for identification.
Shows diagrams of how the door is fixed in different installation scenarios.
Details the required periodic inspections for the metallic frame, motor, and electrical components.
Defines the intended operating conditions and environments for the high-speed door.
Outlines responsibilities for installation, operation, maintenance, and the need for authorized personnel.
Explains the meaning and purpose of various safety symbols used in the manual.
Provides essential safety guidelines for operation, maintenance, and handling to prevent accidents.
Provides guidelines on how and where to store the door components to prevent damage.
Details the packaging dimensions, door dimensions, and weight of the door with the palette.
Offers advice on safe handling practices during transport to the installation site.
Specifies how to safely remove components from the wooden cage at the installation site.
Mentions the possibility of interposing intermediary values for gravity center calculations.
Describes the process of checking delivered components against the preassembled parts.
Outlines site verification, fixing point checks, and opening dimension measurements before assembly.
Provides initial steps for assembling the door, including unpacking, placing guides, and connecting the motoreductor.
Details the characteristics, first steps, and standard connections for the MATRIX 6 control box.
Explains how to connect the inferior security photocell to the control box terminals.
Guides on how to correctly orientate photocells for proper light beam detection.
Details the connection for an additional external push button to terminals 11 and 12.
Explains the connection and programming of wireless transmitter and receiver for the door.
Details the installation and adjustment of the rotary limit switch for door operation.
Explains how to adjust settings using potentiometers, switches, and jumpers on the control box motherboard.
Covers installation of external components like pull cord and remote control receiver.
Instructions for installing and connecting a magnetic detector via the control box.
Guidance on installing a microwaves radar sensor at the specified height and location.
Provides instructions to dismantle the door by reversing the assembly process.
Lists characteristics of the MATRIX 6 control box with frequency converter, including voltage and operating modes.
Details the initial steps for setting up the control panel, including opening the cover and inserting cables.
Explains standard connections differing from control boxes without a frequency converter.
Guides on setting opening and closing speeds for 1CV and 2/3CV converters.
Details standard connections for the MATRIX 6 control box with frequency converter and U.P.S.
Addresses mechanical failures and advises contacting after-sales service for correction.
Covers electrical errors and recommends contacting after-sales service for resolution.
Provides instructions for manual operation of the door during a power outage.
Directs users to contact suppliers or manufacturers for maintenance and repairs.
Emphasizes that maintenance and inspection must be performed by authorized and trained staff.
Offers guidelines on cleaning the door components, specifying safe cleaning agents and methods.
To Next Page
General