Need help?Do you have a question about the Festivo Cooling Cabinet / Freezer Combination and is the answer not in the manual?
General| Brand | Festivo |
|---|---|
| Model | Cooling Cabinet / Freezer Combination |
| Category | Refrigerator |
| Language | English |
The refrigerator-freezer combination is suitable for cooling and freezing of foodstuffs.
Room temperature, where the cabinet can be situated.
Adjust appliance to a straight position using adjusting screws and tighten locking screws.
Fix the bottom front plate in place using clamps.
Fix the appliance to the wall using a fixing bracket at the top of the cabinet.
Insert shelf left edge into groove, lower right edge onto support, move shelf to place.
Loosen hinge screws and move to adjust door alignment and seals.
Contact factory for instructions and mounting set to change door opening direction.
Cooling mechanism uses compressor, condenser, and expansion coil in a closed circuit.
Ensure good air circulation outside and inside for faultless functioning.
Turn thermostat knob to adjust fresh storage compartment temperature between 0 and +2°C.
Push plug into socket, switch main switch to ON; wait for temperature display.
Switch off using main switch or display buttons; unplug for long periods.
Press C/F button to view set point; press button to select desired temperature.
Activate refrigerator for 4 hours at colder temperature for rapid cooling of large quantities.
Activate freezer for 48 hours for rapid freezing of large quantities (over 2 kg).
Internal temperature adjusted to +5°C; suitable for preserves, juices, and day-to-day items.
Temperature close to 0°C; ideal for fresh meat, fish, leftovers, but not cold-sensitive vegetables.
Frozen foods can be stored at all levels of the freezer; quality depends on storage time.
Allow warm foods to cool before storing; pack foodstuffs to conserve taste and freshness.
Clean interior parts monthly with lukewarm water and detergent; clean door seal with water.
Remove dust from compressor area and condenser annually using a vacuum cleaner.
Check simple issues like plug, fuse, and operational advice before calling service.
Lists error codes (E1, E5) for cooling cabinet, their causes, and remedies.
Lists error codes (E2, E3) for freezer, their causes, and remedies.
Lists error code (E7) for display/adjuster contact fault and remedies.
To Next Page