Festo CECX-X-C1 Series User Manual

System manual CECX / Safety notes
2.2 General safety instructions
The documentation contains information necessary for planning the use of
the CECX hardware.
Familiarity with and correct application of the information contained in these
manuals is a prerequisite for successful planning and safe installation,
commissioning and maintenance of automation systems. Only properly
qualified personnel have the required specialist knowledge to correctly in-
terpret and implement the instructions given in this manual.
For reasons of clarity, not every single detail of every version of the prod-
ucts described is listed nor can every conceivable practical situation be
taken into consideration. Should you require additional information, please
contact the manufacturer.
When installing, commissioning and servicing CECX-products, adhere to
the instructions in the respective chapters of the hardware modules.
!
WARNING!
 The following application areas are expressly excluded:
 Use in explosive or fire-risk areas
 Use in mining
 Outdoor use
Other products without additional measures are to be used for these
applications!
 The modules of the CECX modular control system are not designed for
safety-relevant control tasks (e.g.: shutdown in case of an emergency).
For safety-relevant control tasks or personnel safety, additional exter-
nal safety measures must be implemented to ensure the system re-
mains in a safe operating condition even in the event of a fault.
 For additional information see EN 954-1 (EN ISO 13849/1).
CECX-II 2-2

Festo CECX-X-C1 Series Specifications

General

Brand	Festo
Model	CECX-X-C1 Series
Category	Controller
Language	English