6.2 Capacity display
The capacity display [1-2]
indicates the
charge of the battery pack for approx. 2
seconds after the button [1-1]
is press
ed:
70‑100%
40‑70%
15‑40%
< 15%
*
*
Recommendation: Charge the bat
tery pack before any further use.
7 Service and maintenance
► Keep the connecting contacts on the
battery pack clean.
► Keep the vent holes [1-3]
on the bat
tery pack open, as failure to do so
will limit functionality.
► If the battery pack stops working,
consult an authorised Festool cus
tomer service agent.
(www.festool.com/service)
8 Transportation
The Li-ion battery packs included are
subject to the requirements of the leg
islation on hazardous goods. The user
must familiarise themselves with the
local regulations prior to transport.
Special requirements apply to shipping
English
18
To Next Page
Loading...
