Festool CT 33 E - Technical Data; Intended Use; Appliance Preparation and Initial Operation; Electrical Connection

FIG 16
STEP 15: Slide one silver nut into
each of the four slots on the
vacuum.
STEP 16: Swing the handle brackets to align
with the holes.
FIG 17
STEP 17: Fasten the gray bracket onto the handle.
FIG 18
STEP 18: Secure the bracket to the vacuum
with four silver bolts.
FIG 19
STEP 19: Slide a nut into each of the
bracket’s slots.
FIG 20
5