EasyManua.ls Logo

Festool ETS EC 150/3 EQ - Accessories; Environment

Festool ETS EC 150/3 EQ
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10.3 Replace the sanding pad and sanding
pad brake
The rubber sleeve [4-2] brushes off the sanding
pad and prevents uncontrolled turning of the
sanding pad. The sanding pad brake is almost
wear-free thanks to the pins used.
In the case of a decreasing braking effect, first
check the sanding pad for wear and replace it if
necessary. Replace the damaged sanding pad
brake/rubber sleeve.
11 Accessories
Use only original Festool accessories and
Festool consumable material intended for this
machine. These components are designed spe
cifically for this machine. Using accessories
and consumable material from other suppliers
will most likely affect the quality of your results
and limit warranty claims. Machine wear or
your own personal workload may increase de
pending on the application. Protect yourself and
your machine, and preserve your warranty
claims by always using original Festool acces
sories and Festool consumable material!
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under www.festoolusa.com.
11.1 SYSTAINER
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer". This pro
vides protection and storage for the tool and ac
cessories. The Systainers are stackable and
can be interlocked together. They also can be
interlocked atop Festool CT dust extractors.
To open the Systainer
Turn the T-loc [SYS-b-1] to this posi
tion.
To lock the Systainer
Turn the T-loc [SYS-b-1] to this posi
tion.
To connect two Systainers
Place one Systainer on the top of the other
(Fig.
[SYS-a]).
Turn the T-loc [SYS-b-1] to one of
this positions (Fig. [SYS-b]).
The Systainers are connected and locked.
A Systainer Classic Line can be connected
to a Systainer T-Loc or to a Systainer
3
from below via its four locking devices.
A Systainer T-Loc can be connected to a
Systainer
3
both from below and from
above.
SYS-a
SYS-b-1
SYS-b
o
p
e
n
l
o
ck
connect
connect
T-loc
12 Environment
Do not dispose of the device as domestic
waste!
Dispose of machines, accessories and
packaging at an environmentally responsible
recycling centre. Observe the respective nation
al regulations.
English
10

Other manuals for Festool ETS EC 150/3 EQ

Related product manuals