Contents
1 About this manual....................................... 3
2 Symbols.......................................................3
3 Safety warnings...........................................3
4 Intended use
................................................6
5 Technical data............................................. 6
6 Functional description................................ 6
7 Operation.....................................................6
8 Settings....................................................... 7
9 Working with the machine.......................... 8
10 Service and maintenance............................9
11 Accessories............................................... 10
12 Environment..............................................10
13 General information..................................11
1 About this manual
Save these instructions
It is important for you to read and understand
this manual. The information it contains relates
to protecting your safety and preventing prob
lems
. The symbols below are used to help you
recognize this information.
DANGER Description of imminent
hazard and failure to avoid
hazard will result in death.
WARN
ING
Description of hazard and
possible resulting injures
or death.
CAUTION Description of hazard and
possible resulting injuries.
NOTICE Description of possible
damage of the device or its
surroundings.
2 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Connecting the mains power cable
Disconnecting the mains power cable
Safety class II
Tool contains a chip which stores data.
See section
13.1
Tip or advice
Handling instruction
A Ampere
Diameter
Hz Hertz
" Inch
kg Kilogram
mm Millimetre
lb. Pound
min
-1
Revolutions per minute
3 Safety warnings
3.1 General power tool safety warnings
WARNING!
Read all safety warnings, in
structions, illustrations and specifica
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
a. Keep work area clean and well lit. Clut
tered or dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2 ELECTRICAL SAFETY
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
English
3
To Next Page
Loading...
