Contents
1 Symbols..................................................... 26
2 Safety warnings.........................................26
3 Intended use..............................................30
4 Technical data........................................... 30
5 Machine features...................................... 30
6 Commissioning..........................................31
7 Settings......................................................32
8 Working with the power tool..................... 34
9 Service and maintenance..........................36
10 Accessories............................................... 37
11 Environment..............................................38
12 Contact us..................................................38
1 Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and
safety notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not look directly at the light.
Do not dispose of as domestic waste.
Direction of rotation of saw and the
saw blade
Saw blade dimensions
a ... Diameter
b ... Locating bore
Tip or advice
Handling instruction
Safety class II
Disconnect from the power supply!
Symbol Significance
Hazardous area! Keep hands away!
Warning: Hot surface!
Risk of pinching fingers and hands!
Danger of injury by free-moving saw
blade
2 Safety warnings
2.1 General power tool safety warnings
WARNING! Read all safety warnings, in
structions, illustrations and specifica
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
a. Keep work area clean and well lit. Clut
tered or dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2 ELECTRICAL SAFETY
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or groun
ded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an in
creased risk of electric shock if your body
is earthed or grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
English
26
To Next Page
Loading...
