Festool LEX 3 125/3 - Safety Instructions; Intended Use; Suitable Materials and Restrictions; Required Accessories

16
LEX 3
GB
2.3 Emission levels
Levels determined in accordance with EN ISO 15744/ISO 28927 are typically:
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3 Intended use
The compressed air eccentric sanders are suitable
for sanding wood, plastic, metal, stone, compos-
ites, acrylic-based mineral materials, paint/clear
coats, fillers and similar materials.
Materials containing asbestos must not be pro-
cessed.
Only use with Festool hose system IAS 2 or IAS 3
and Festool sanding pads!
The user is liable for improper or non-in-
tended use.
4Technical data
* at 6 bar inlet pressure; n
0
, load 30N
Version Sound pressure level / Sound
power level
Vibration emission level
3 directions 1 direction
1
L
PFA
/ L
WA
Uncertainty a
h
Uncertainty K a
h
Uncertainty K
[dB(A)] [m/s²] [m/s²] [m/s²] [m/s²]
LEX 3 77/2,5 72 / 83 3 < 2.5 1.5 < 2.5 1.5
LEX 3 125/3 70 / 81 3 4.4 2.0 < 2.5 1.5
LEX 3 125/5 72 / 83 3 5.0 2.0 < 2.5 1.5
LEX 3 150/3 72 / 83 3 3.7 2.0 < 2.5 1.5
LEX 3 150/5 72 / 83 3 3.9 2.0 2.7 1.5
LEX 3 150/7 76 / 87 3 5.8 2.0 3.2 1.5
1.
For information: According to the old EN ISO 8662.
Wear ear protection.
Compressed air eccentric sander LEX 3 LEX 3 LEX 3 LEX 3 LEX 3 LEX 3
77/2.5 125/3 125/5 150/3 150/5 150/7
Drive Compressed-air vane motor
Sanding pad Ø 77 mm 125 mm 150 mm
Sanding stroke 2,5 mm 3 mm 5 mm 3 mm 5 mm 7 mm
Idle engine speed n
0
10500 rpm 9 500 rpm 10 000 rpm
Air consumption at rated load* 270 l/min 290 l/min 310 l/min
Air pressure
Max. inlet pressure 6.2 bar ( 90 psi)
Recommended minimum 5 bar ( 72.5 psi)
Compressed air quality i.a.w. DIN
ISO 8573-1
Class 5
Recommended storage temperature
/ operating temperature
0° - 60° C / 10° - 40° C
Weight 0.8 kg 1.0 kg 1.0 kg