Intended Use
The OF 2200 EB router is designed exclusively for
machining of wood, wood-like materials, and plastics. The
router may also be used for machining aluminum and
plasterboard when an appropriate router bit is installed. All
applications beyond this are regarded as improper use.
The tool should not be altered or used for any other
purpose other than as specified in these operating
instructions. Using the tool in contravention to this manual
may lead to injury and will void your warranty. The user
shall be responsible and liable for accidents, injuries, and
property damage resulting from misuse or abuse of this
tool.
Overview
Item Name or Description Ref. Page(s)
A Guide Rod Clamping Knob 19, 20
B Guide Rod Eyelet 19, 20
C Baseplate Release Lever 11
D Depth Stop Turret 8, 10
E Turret Latching Lever 8, 10
F Depth Stop Post 8, 10
G Depth Stop Locking Lever 8, 10
H Depth Stop Post Handle 8, 10
I Fine Adjustment Dial 8, 10
J Speed Control Dial 7
Item Name or Description Ref. Page(s)
K Ratcheting Spindle Lock 9
L Collet 9
M Handle 12
N Trigger Lock 7
O Power Trigger 7
P Dust Shroud Release Lever 7
Q Dust Shroud 7
R Plunge Lock Knob 8, 10, 12
S Dust Collection Port 7
6 OF 2200 EB Router
To Next Page
Loading...
