UG-KAPEX KS 120
9
GB
1Symbols
The illustrations specified are located at the begin-
ning and end of the operating manual.
2Scope of delivery
Base frameUG-KAPEX KS 120
Trimming attachment KA-UG-KS120
3Technical data
4 Intended use
The base frame UG-KAPEX KS 120 was designed
specifically for use with Festool compound mitre
saws KS 120 EB and KS 88 E.
The trimming attachment KA-UG-KS120 was de-
signed specifically for fitting to the base frame UG-
KAPEX KS 120.
The base frame was designed for sawing boards
and profiles in combination with a power tool.
5 Safety instructions
WARNING!
Read all safety warnings, in-
structions, illustrations and specifications provid-
ed with this tool.
Failure to follow all instructions
listed below may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future ref-
erence.
–
Remove the plug from the socket before adjust-
ing the machine settings or changing accessory
parts.
Some accidents are caused by power tools
starting accidentally.
–
Set up the base frame correctly before attach-
ing the power tool.
Set up the base frame cor-
rectly to prevent the frame from collapsing.
–
Secure the power tool safely on the base frame
before using it.
If the power tool slips on the base
frame, you may lose control of the machine.
–
Place the base frame on a solid, even and hori-
zontal surface.
If the base frame can slip or wob-
ble, guiding the power tool or workpiece evenly
and accurately will not be possible.
–
Do not overload the base frame and never use it
as a ladder or trestle.
Overloading or standing on
Symbol Significance
Warning of general danger
Read operating instructions and safety
notices!
Disconnect from the power supply!
CAUTION! Risk of injury to fingers.
[1-1]
2 x retaining rails
[1-2]
1 x base frame with rollers (two-part)
[1-3]
1 x folding/fixed stirrup, handle
4 x M6x60 screws
4 x M6 nuts
4 x screws M6x16
4 x D6.4 plain washers
1 x Allen key
[1-4]
Left trimming attachment KA-UG-KS120-
L
[1-5]
Right trimming attachment KA-UG-
KS120-R
1 x Allen key
Base frame UG-KAPEX KS 120
Length of base frame without trimming attachment 560 mm (15-3/4")
Length of base frame with trimming attachment on one side 1760 - 2680 mm (5’ 25/32" - 8’ 51/64")
Length of base frame with trimming attachment on both sides 2960 - 4810 mm (9’ 23/32" - 15’ 25/32")
Working height 900 mm (35-7/16")
Max. load UG-KAPEX/KA-UG 100/20 kg (220/44 lbs.)
Weight of UG-KAPEX without compound mitre saw 10,1 kg (22.27 lbs.)
Weight of KA-UG 4,6 kg (10.14 lbs.)
WARNING
The user will be liable for damage due to improp-
er use.
To Next Page
Loading...
