61
STANDARD EQUIPMENT
The system consists of:
- radio power supply cables;
- cables for speakers and tweeters on
front doors;
- cables for rear speakers on lug-
gage cover supports.
- Aerial wire;
- radio housing;
- front speaker housing (on front
doors);
- rear speaker housing (on luggage
cover supports).
The radio must be mounted in the
proper housing occupied by the cov-
er
A-fig. 69, which can be removed
operating the two tongues in the
points B.
The power wires, speaker and aeri-
al connection wires can be found in
the compartment.
For the front speakers, use the seats
on the object-holder pocket of the door
panel. To have access, unscrew the
screws indicated in fig. 70.
For the tweeters, use the pressure-
fit seatings shown in
fig. 71.
The rear speakers must be posi-
tioned under the side supports of the
luggage cover
fig. 72.
fig. 69
P4E02040
fig. 70
P4E01751
fig. 71
P4E02042
fig. 72
P4E011752
To Next Page
Loading...
