93
BOOT LIGHT
To replace the 12V-5W cylindrical
bulb, remove the transparent element
A-fig. 29 by levering with a screw dri-
ver in point indicated by the arrow.
Remove the plastic guard
B and re-
place the bulb.
fig. 31
P4E01428
IF A FUSE BLOWS
REPLACING THE FUSES
If an electrical device is not working,
check whether the respective fuse is
blown fig. 31.
A - Undamaged fuse.
B - Fuse with broken filament.
Replace broken filament fuse with
undamaged fuse.
Before changing a fuse,
check the ignition key has
been removed and that
all the other electric devices have
been turned off/disabled.
Never change a fuse
with another amperage:
fire risk.
If the problem occurs
again, have the car in-
spected at a Fiat Dealer-
ship.
To Next Page
Loading...
