FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant
1.4L Turbo Engine
We recommend you use MOPAR®
Antifreeze/Engine Coolant 10 Year/
150,000 Mile Formula OAT (Organic
Additive Technology).
6.1 Quarts
(5.8 Liters)
Engine Oil with Filter
1.4L Turbo Engine
We recommend you use API Certified
SAE 5W-40 Full Synthetic Engine Oil.
4 Quarts
(4.0 Liters)
Engine Oil Filter
We recommend you use MOPAR®
Engine Oil Filters.
—
Fuel Selection
1.4L Turbo Engine
87 Octane Acceptable — 91 Octane
Recommended
13.1 Gallons
(50 Liters)
(Approximate)
Manual Transmission We recommend you use MOPAR®
C635 DDCT/MTX Transmission Fluid.
—
Euro Twin Clutch
Transmission
We recommend you use MOPAR®
C635 DDCT/MTX Transmission Fluid.
—
Brake Master Cylinder
We recommend you use MOPAR®
DOT 4.
—
Spark Plugs 1.4L Turbo
Engine
We recommend you use MOPAR®
Spark Plugs (Gap 0.026 in [.65 mm]).
—
CAUTION!
• Mixing of engine coolant (antifreeze) other than specified Organic Additive Tech-
nology (OAT) engine coolant (antifreeze), may result in engine damage and may
decrease corrosion protection. Organic Additive Technology (OAT) engine coolant
is different and should not be mixed with Hybrid Organic Additive Technology
(HOAT) engine coolant (antifreeze) or any “globally compatible” coolant (anti-
freeze). If a non-OAT engine coolant (antifreeze) is introduced into the cooling
system in an emergency, the cooling system will need to be drained, flushed, and
refilled with fresh OAT coolant (conforming to MS-12106), by an authorized
dealer as soon as possible.
• Do not use water alone or alcohol-based engine coolant (antifreeze) products.
Do not use additional rust inhibitors or antirust products, as they may not be
compatible with the radiator engine coolant and may plug the radiator.
• This vehicle has not been designed for use wit h propylene glycol-based engine
coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is
not recommended.
MAINTAINING YOUR VEHICLE
95
To Next Page
Loading...
