Fiat 500c 2012 Specifications

1 / FIAT 500c SPECIFICATIONS http://media.chrysler.com
500c • Specifications
2012 FIAT 500c
SPECIFICATIONS
Dimensions are in inches (millimeters) unless otherwise noted.
GENERAL INFORMATION
Body Style
A-segment convertible
Assembly Plant
Toluca, Mexico
EPA Vehicle Class
Subcompact
Introduction Date
Spring 2011 as a 2012 model
ENGINE: 1.4-LITER SOHC 16-VALVE MULTIAIR
®
INLINE FOUR-CYLINDER
Availability
Standard — Fiat 500c Pop and Lounge
Type and Description
Inline four-cylinder, liquid-cooled
Displacement
83.48 cu. in. (1368 cu. cm)
Bore x Stroke
2.83 x 3.31 in. (72.0 x 84.0 mm)
Valve System
Belt-driven, MultiAir
®
, SOHC,16-valves, hydraulic end-pivot roller
rockers
Fuel Injection
Sequential, multi-port, electronic, returnless
Construction
Cast iron block with aluminum-alloy heads and aluminum-alloy
bedplate
Compression Ratio
10.8:1
Power (SAE net)
101 bhp (75 kW) @ 6,500 rpm (73.8 bhp/L)
Torque (SAE net)
98 lb.-ft. (133 N•m) @ 4,000 rpm
Max. Engine Speed
6,900 rpm (electronically limited)
Fuel Requirement
87 octane (R+M)/2 acceptable
91 octane recommended
Oil Capacity
4.0 qt. (3.8L) with dry filter
Coolant Capacity
4.6 qt. (14.4L)
Emission Controls
Dual three-way catalytic converters, heated oxygen sensors and
internal engine features
(a)
Max. Gross Trailer Weight
Not rated for trailer tow
Estimated EPA Fuel Economy mpg (City/Hwy)
30/38 (5-speed manual)
27/32 (6-speed automatic)
Engine Assembly Plant
GEMA Engine Plant, Dundee, Mich.
(a) Meets Federal Tier 2 Bin 5 emission requirements and ULEV II requirements in California, Massachusetts, New York, Maine, Vermont,
Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington.

Fiat 500c 2012 Specifications

General

Brand	Fiat
Model	500c 2012
Category	Automobile
Language	English