● Language: Allows you to select the language in which
to display the information/w
arnings.
● Instrument Cluster Backlight: Allows you to increase/
decrease the brightness from level 1 to 8.
● Automatic Reset Trip B: Allows you to set the options
to reset the Trip B (never, always, every two hours or
every eight hours).
● Phone Repetition: Allows you to select “On” or
“Off”. The instrument cluster display can also
display the information concerning phone mode.
The information that can be displayed is the
connection status of the mobile phone (phone
connected or disconnected), the active telephone
calls/incoming/on hold, and the management of
double calls (first incoming second waiting, etc.).
● Navigation Repetition: Allows you to select “On” or
“Off” on the instrument cluster display, information
relating to the navigation mode.
Units
By selecting the item "Units Of Measure”, you can
select the unit of measure used in the display.
Possible options are:
● US
● Metric
● Custom
Clock And Date
By selecting the item "clock and date", you can adjust
the clock.
Possible options are:
● Se
t Time: Adjust hours/minutes.
● Set Format: Adjust the time format "12h" (12 hours)
or "24h" (24 hours).
● Set Date: Adjust day/month/year.
Security
By selecting the item “Security”, you can make the
following adjustments:
● Passenger Airbag: Activation/Deactivation of the
passenger airbag.
● Speed Warning: Set the vehicle speed limit (mph or
km/h), which the driver is notified through a visual
and acoustic signaling (display of a message and a
symbol on the display).
● Seat Belt Buzzer: This function is only viewable when
the Seat Belt Reminder (SBR) system is active.
Safety And Assistance
By selecting the item "Safety & Assistance", you can
make the following adjustments:
● Warning Buzzer Volume: Increase or decrease the
volume of the buzzer by selecting “Off”, “Low”,
“Medium”, or “High”.
● LaneSense Warning — If Equipped: A selection of the
"readiness" of intervention of LaneSense.
● LaneSense Strength — If Equipped: Increase or
decrease the lanesense strength by selecting “Low”,
“Medium”, or “High”.
● Intelligent Speed Assist: A selection of the type of
function provided by the system (confirmation or
automatic).
● T
raffic Sign Recognition: Allows you to select “On” or
“Off”.
● Traffic Sign Recognition Warning: A selection of the
type of information of the warning (Off, Visual or
Visual and Chime).
● New Speed Zone Detection: A selection of the type of
information of the detection (Off, Visual or Visual and
Chime).
● Autonomous Emergency Braking (AEB)/Forward
Collision Warning: A selection of the type of
information of the warning (Off, Only Warning or
Warning and Active Braking).
● AEB/Forward Collision Sensitivity: Increase or
decrease the sensitivity of the system by selecting
“Near”, “Medium”, or “Far”.
● Park Assist: A selection of the type of information
provided by Park Assist.
● Park Assist Vol.: A selection of the volume of
acoustic signals provided by Park Assist.
● Attention Assist/Drowsy Driver Alert: Enabling/
Disabling the alert.
● Blind Spot Assist: Off, Lights, Lights and Chime.
Mirrors & Wipers
By selecting the item "Mirrors & Wipers”, you can make
the following adjustments:
● Rain Sensing Auto Wipers: Enabling/disabling the
automatic operation of wipers in the event of rain.
GETTING TO KNOW YOUR INSTRUMENT PANEL 61
3
To Next Page
Loading...
