STARTING AND DRIVING
142
O
800
km/h
01/21
192
51
%
CHARGE
ECO POWER
P
km km
1
170 F6S0262
In automatic mode, the driving
programme is indicated by (D).
In manual mode, (M) and the number of
the selected gear is indicated.
In all-electric driving, the gear engaged
is not indicated.
The state of the gearbox remains
displayed on the instrument panel for
a few seconds after switching off the
ignition.
Park position P
This mode locks the front wheels. (P) is
automatically engaged when ignition is
switched off.
The vehicle automatically shifts into (P)
if
the vehicle is stopped
the driver's door is opened while the
vehicle's speed is below 2 km/h
The vehicle will not shift into (P) if it is
moving too fast. Stop the vehicle and
shift into (P).
To shift into (P), press button (P). The
LED on the button turns on.
To shift out of (P): Depress the brake
pedal and select the desired mode.
Reverse gear R
To shift into and out of (R), the vehicle
must be at standstill and the brake
pedal has to be depressed.
With the reverse gear engaged, the
LED on the button turns on.
50)
Neutral N
In this mode, the propulsion system
does not transfer torque to the wheels.
To restart the propulsion system when
the vehicle is already moving, use (D)
only.
With the neutral engaged, the LED on
the button turns on.
When (N) is selected and ignition is
switched off, (P) is engaged after a
short time
Automatic mode D
With the (D) engaged, the LED on the
button turns on.
WARNING In slippery conditions,
operate the vehicle in (D) for enhanced
riding and handling performance.
Manual mode M
With the (M) engaged, the LED on the
button turns on.
In this mode, it is possible to change
gears manually using steering the
wheel paddles.
Steering-mounted controls
In mode (M) or (D), the steering-
mounted control paddles can be used
to change gear manually. They cannot
be used to select neutral or to engage
or disengage reverse gear.
MANUAL MODE
Manual mode (M) can be activated
pushing the button (D) in each driving
situation and speed.
The selected gear is indicated in the
instrument panel display.
If a higher gear is selected when vehicle
speed is too low, or a lower gear when
vehicle speed is too high, the shift
is not executed. This can cause a
message in the instrument panel
display.
In manual mode, no automatic shifting
to a higher gear takes place at high
engine revolutions.
To Next Page
Loading...
