151
the terrain. In the presence of areas in
shade, or in conditions of bright sunlight
or inadequate lighting, the image may
be darkened and with lower contrast.
Obstacles may appear further away than
they actually are.
59)
The operation of the sensors, as well
as any associated functions, may be
disrupted by noise pollution such as that
emitted by noisy vehicles and machinery
(e.g. lorries, pneumatic drills), by the
accumulation of snow or dead leaves
on the road or in the event of damaged
bumpers and mirrors. When reverse gear
is engaged, an audible signal (long beep)
indicates that the sensors may be dirty.
A front or rear impact to the vehicle can
upset the sensors’ settings, which is not
always detected by the system: distance
measurements may be distorted. The
sensors do not systematically detect
obstacles that are too low (pavements,
studs) or too thin (trees, posts, wire
fences). Certain obstacles located in the
sensors’ blind spots may not be detected
or may no longer be detected during the
manoeuvre. Certain materials (fabrics)
absorb sound waves: pedestrians may not
be detected.
60)
Clean the bumpers and door mirrors
and the field of vision of the cameras
regularly. When washing your vehicle at
high pressure, direct the spray from at
least 30 cm away from the radar, sensors
and cameras.
SHORTCUTS FOR
ADVANCED DRIVER
ASSISTANCE
SYSTEMS
Advanced Driver Assistance System
(ADAS) can be accessed directly to
quickly activate/deactivate them.
By default, driving aids are already
stored in the system (e.g. Stop-Start,
Lane Keeping Assist)
Other driving aids can be added or
deleted from the page.
It is configured in the
"ADAS">"Functions" touch screen
application.
press the button (1) fig. 178
178 F6S0014
press the button corresponding
to the Advanced Driver Assistance
System concerned:
full symbol: the function is
added to the shortcuts
empty symbol: the function is
deleted from the shortcuts
check the modification in the
"Shortcuts" tab.
QUICK DEACTIVATION
Press and hold the Advanced Driver
Assistance System (ADAS) button to
deactivate the selected functions until
next vehicle start, fig. 179.
179 A6S0123
To Next Page
Loading...
