TECHNICAL SPECIFICATIONS
258
VEHICLE
IDENTIFICATION
VEHICLE
IDENTIFICATION
NUMBER
326 F6S0077
The Vehicle Identification Number may
be embossed on the instrument panel,
visible through the windscreen fig. 326,
in the engine compartment on the
right body panel or on the passenger
compartment floor, in front of the front
right seat.
IDENTIFICATION PLATE
327 F6S0200
The identification plate fig. 327 is
located on the front left door frame.
Information on identification label:
A Name of Manufacturer
B Vehicle identification number
C Technically allowed max. weight
with full load
D Technically allowed max. weight
for combined car
E Technically allowed max. weight on
axle 1
F Technically allowed max. weight on
axle 2
G Engine identification
H Type variant version
I Paintwork colour code
L Code for spare parts
The combined total of front and
rear axle loads must not exceed the
permissible gross vehicle weight.
Vehicle's kerb weight depends on
the specification of the vehicle, e.g.
optional equipment and accessories.
Refer to the EEC Certificate of
Conformity provided with your
vehicle or other national registration
documents.
The technical data is determined in
accordance with European Community
standards. We reserve the right to
make modifications. Specifications in
the vehicle documents always have
priority over those given in this manual.
ENGINE IDENTIFICATION
The technical data tables show the
engine identifier code.
To identify the respective engine,
refer to the engine power in the EEC
Certificate of Conformity provided
with your vehicle or other national
registration documents.
Tire Information Label
(Australia and New
Zeeland market)
The label is fitted on the rear driver
door's ledge.
To Next Page
Loading...
