61
BONNET
OPENING
56) 57) 58) 59) 60) 61)
21)
89 F6S0081
90 F6S0082
WARNING Before doing anything under
the bonnet, you must switch off the
ignition to avoid any risk of the engine
restarting automatically. Take care
with objects or clothing that could be
caught in the blades of the cooling fan
or in certain moving components - risk
of strangulation and serious injury!
Open the driver's door (for left-hand
drive versions) or the passenger door
(for right-hand drive versions).
Pull the release lever (1) fig. 91 and
return it to its original position.
91 F6S0101
Push the safety catch (2) fig. 92
upwards and open the bonnet.
92 F6S0011
93 F6S0012
Release the supporting rod (3) fig. 93
from its locking device, then insert the
rod end into the recess of the bonnet.
CLOSING
Hold the bonnet up with one hand and
with the other remove the rod from
recess and fit it back into the locking
device.
Lower the bonnet and let it fall into
the latch from a low height (20-25
cm). Make sure that the bonnet
is completely closed and not only
fastened by the locking device by trying
to open it. If it is not perfectly closed,
do not try to press the bonnet down
but open it and repeat the procedure.
62) 63)
22) 23)
To Next Page
Loading...
