What to do if Fiat Car Navigation system says 'There’s no bluetooth phone connected'?
If the Fiat Car Navigation system display shows 'NO PHONE CONNECTED' or says 'There’s no bluetooth phone connected', ensure your paired mobile phone is turned on, properly paired, and that Bluetooth® wireless technology is enabled on your phone (look for “Blue&Me” or a similar ID). Also, make sure the paired phone is within range of the system.
What to do if Fiat Car Navigation system says “Bluetooth pairing timed out. Please try again later.”?
If the Fiat Car Navigation system displays 'PAIRING FAILED' or says “Bluetooth pairing timed out. Please try again later.”, retry the pairing procedure. During the PIN entering step, verify that the PIN number you are entering on the mobile phone is the same number that is shown on the instrument panel display.
What to do if Fiat Car Navigation system says 'Pairing failed. Please try again'?
If the Fiat Car Navigation system displays 'PAIRING FAILED' or says 'Pairing failed. Please try again', first verify that you're entering the correct PIN number and try again. If it still fails, reset your mobile phone by turning it off and on, and then retry the pairing procedure.
What to do if Fiat Car Navigation system displays 'PHONE DISCONNECTED'?
If the Fiat Car Navigation system display shows 'PHONE DISCONNECTED', you can try the following: * Reset Blue&Me™ Nav by turning the mobile phone off and on * Reset Blue&Me™ Nav by turning the ignition key to STOP and then to MAR again
How to fix 'NO PHONEBOOK FOUND' on Fiat Car Navigation system?
If the Fiat Car Navigation system displays 'NO PHONEBOOK FOUND' or says “As requested, the phonebook has not been copied...”, for 'pull' phones, use the COPY PHONEBOOK option in the SETTINGS menu to download the phonebook again, or enter contact information on your mobile phone and re-download. For 'push' phones, use the ADD CONTACTS option in the SETTINGS menu to send contacts to the system.
What to do if Fiat Car Navigation system says 'Phonebook empty'?
If the Fiat Car Navigation system displays 'PHONEBOOK EMPTY' or says “Phonebook empty...”, for 'pull' phones, ensure your mobile phone has valid contact information (name and at least one phone number), then download the phonebook again. For 'push' phones, re-download the phonebook, ensure you send valid contacts when prompted, or use the ADD CONTACTS option in the SETTINGS menu to send contacts from your mobile phone to the system.
Why Fiat Car Navigation system doesn't respond to voice command?
If the Fiat Car Navigation system doesn't respond to voice commands or key presses, try pressing and clearly pronouncing the voice command again, facing forward and speaking at a normal volume. Alternatively, press ß/MAIN and try the operation again, ensuring you take action within approximately eight seconds.
Why does answering on my phone activate the free-hands function in my Fiat Car Navigation system?
If, when near the car, answering a call using your mobile phone's answer button activates the car's hands-free function, consult your mobile phone's manual. It will provide instructions on setting the default location for phone audio when a call is received.
Why are middle names not recognized by the Fiat Car Navigation system?
The Fiat Car Navigation system does not support prefixes, suffixes, or middle names/initials when calling contacts by voice. When calling, pronounce the contact’s name without these. If you have similar names, modify one in your phone and re-download the phonebook.
How to call international numbers on Fiat Car Navigation system?
To call phone numbers with international dialling codes (e.g., +39, +44, +33) on your Fiat Car Navigation system, replace the '+' sign with '00'. For example, +39 should be entered as 0039.
General| Brand | Fiat |
|---|---|
| Model | BRAVO |
| Category | Automobile |
| Language | English |
To Next Page
