Regarding Problems With Calls
Symptoms Cause Solution Method
When starting a call, vehicle noise from the
other party can be heard.
For about three seconds after starting a call,
the Bluetooth unit's Noise Suppression
function requires time to adapt to the call
environment.
This does not indicate a problem with the
device.
The other party cannot be heard or the
speaker's voice is quiet.
The volume is set at zero or low. Increase the volume.
Other Problems
Symptoms Cause Solution Method
The indication for the remaining battery is
different between the vehicle and the device.
The indication method is different between
the vehicle and the device.
—
When a call is made from the vehicle, the
telephone number is updated in the
incoming/outgoing call record but the name
does not appear.
The number has not been registered into the
phonebook.
If the number has been registered into the
phonebook, the incoming/outgoing call
record is updated by the name in the
phonebook when the engine is restarted.
The cell phone does not synchronize with
the vehicle regarding the incoming/outgoing
call record.
Some types of cell phones do not
synchronize automatically.
Operate the cell phone for synchronization.
It takes a long time to complete the function
for changing the language.
A maximum of 60 seconds is required. —
58
FIAT Connect 7.0
To Next Page
Loading...
