Do you have a question about the Fiat Dino and is the answer not in the manual?
Brand | Fiat |
---|---|
Model | Dino |
Category | Automobile |
Language | English |
Engine specifications including bore, stroke, capacity, and power ratings.
Detailed description of the engine's construction and features.
Technical specifications for the engine, including type, bore, stroke, and power.
Engine lubrication system, oil pressure, and oil filter.
Description of the fuel system, carburetors, and fuel filter.
How the starting system operates.
Description of the alternator and recharging system.
Details on ignition system components like distributor and coil.
Description of electric window regulators.
Step-by-step guide for removing and installing the engine.
Sectional view of the engine, showing cylinders and head.
Detailed instructions on valve timing and clearance.
Procedures for checking valve clearance and timing.
Steps for adjusting the tension of timing chains.
Description and specifications of Weber carburetors.
Explanation of carburetor operation in different modes.
Details on carburetor operation at idle and transfer speeds.
Explanation of the power circuits within the carburetor.
How the easy starting device functions.
Specifications for carburetor settings.
Procedures for tuning throttle valves and adjusting idle.
Method for checking the float level in carburetors.
How to adjust the drive belts for the alternator and water pump.
Procedures for inspecting the clutch assembly.
Steps for installing the clutch onto the flywheel.
How to adjust the free travel of the clutch pedal.
Description of the transmission system with five forward gears.
Details and diagrams of the transmission maincase.
Description and diagrams of the synchronizer assembly.
How gears engage, focusing on synchromesh.
Specific procedure for engaging first gear.
Steps for removing the mainshaft cluster.
Procedures for disassembling the mainshaft cluster.
Description and diagram of the gearshift mechanism.
Technical specifications for gears, ratios, and backlash.
Details on adjusting the drive belts.
Step-by-step guide for installing and removing the rear axle.
Description of the differential unit.
Explanation of how the spin-resistant differential works.
Procedure for checking the spin-resistant device.
Diagram and explanation of the differential cage assembly.
Instructions for assembling the differential cage.
Method for determining the correct pinion thrust washer thickness.
Procedure for preloading pinion bearings.
How to preload differential cage bearings and adjust the pinion.
Diagram of the bevel pinion assembly.
Method for calculating the correct thrust washer thickness.
Procedure for checking backlash between pinion and ring gear.
Technical specifications for the rear axle.
Details on camber, caster, and toe-in adjustments.
Steps for removing the front suspension.
Steps for assembling the swinging units.
Information on checking and adjusting front wheel bearings.
Procedures for inspecting and repairing the rear suspension.
Details on hydraulic shock absorbers.
Procedures for removing and installing the steering gear.
How to inspect and adjust the steering gear.
Steps for dismantling the steering gear.
How to check and adjust front wheel toe-in.
Description of the disc brake system.
Diagram of the brake booster and master cylinder.
Steps for removing and replacing lining pads.
Procedures for removing dust shields.
Procedures for bleeding the hydraulic brake lines.
Procedures for fitting and adjusting the brake pressure regulators.
Procedures for checking and setting the voltage regulator.
Description of how the starting motor operates.
Procedures for distributor bench testing.
Information about the vehicle's fuses.
Procedures for adjusting window travel.
Steps for removing the window regulator motor.
Continuation of the vehicle's electrical system wiring diagram.