156 Nero 603 83 540 Connect DOBLO Livello 4 GB
CONNECT Nav+
156
– select and confirm “Sending mode”
by rotating and pressing the knob 22-
fig. 1; the screen shown in fig. 8 will
be displayed;
– select and confirm “On” (or “Off”
if you want to deactivate it) by rotat-
ing and pressing the knob 22-fig. 1;
– turn the knob 22-fig. 1 to select
“Event mode” then press the knob to
confirm; the condition shown in
fig. 9 will be displayed;
– turn the knob 22-fig. 1 to select
“Route (km/mi)” or “Time (hours)”
then press the knob to confirm.
IMPORTANT km (kilometres) or
mi (miles) can be selected in the “Set-
up / Setup-CONNECT / Distance
units” menu.
Selecting “Route (km/mi)” the mes-
sage will be sent at the number of km
or miles set in “Data frequency send”;
selecting “Time (hours)” the message
will be sent at the number of hours set
in “Data frequency send”;
– turn knob 22-fig. 1 to select “Da-
ta frequency send” then press to con-
firm; according to the previously set
parameter (Route or Time) the display
will show the screen in fig. 10 or in
fig. 11;
fig. 8
F0D1082g
fig. 9
F0D1083g
fig. 10
F0D1084g
fig. 7
F0D1081g
To Next Page
Loading...
