Fiat Doblo - Page 22

21 Nero 603 83 540 Connect DOBLO GB
CONNECT Nav
21
– select and confirm “Sending mode”
by rotating and pressing the knob 22-
fig. 1, the screen in fig. 10 will be dis-
played;
– select and confirm “ON” (or
“OFF” if you want to deactivate it) by
rotating and pressing the knob 22-
fig. 1;
– turn the knob 22-fig. 1 to select
“EVENT MODE” then press the knob
to confirm; the condition shown in
fig. 11 will be displayed;
– turn the knob 22-fig. 1 to select
“ROUTE (km/mi)” or “TIME (hours)”,
then press the knob to confirm.
Selecting “ROUTE (km/mi)” the
message will be sent at the number
of km or miles set in “DATA FRE-
QUENCY SEND”; selecting “TIME
(hours)” the message will be sent at
the number of hours set in “DATA
FREQUENCY SEND”;
– turn knob 22-fig. 1 to select “DA-
TA FREQUENCY SEND” then press
to confirm; according to the previously
set parameter (route or time) the dis-
play will show the screen in fig. 12 or
fig. 13;
fig. 9
F0D2162g
fig. 10
F0D2163g
fig. 11
F0D2164g
fig. 12
F0D2165g
001-023 Doblo Connect GB 15-06-2007 10:32 Pagina 21