Fiat Doblo - CD SETUP Menu

38 Nero 603 83 540 Connect DOBLO GB
CONNECT Nav
38
“CD SETUP” MENU
Select and confirm “CD SETUP”
with the knob 22-fig. 1 to display the
following menu fig. 24:
– CD TIME MODE
– CD PROG
– CD NAME
– CD INFO
– OK.
“CD TIME MODE” function
The “CD TIME MODE” function de-
fines time information about the CD
shown on the display:
– “TRACK ELAPSED TIME” (time
elapsed from start of track) (standard
function)
– (*) “TOTAL ELAPSED TIME” (to-
tal time elapsed from start of CD)
– (*) “TOTAL REMAINING TIME”
(total remaining time to the end of CD)
To activate new settings, select “OK”
from the CD SETUP menu.
(*) Option not available when the “Shuffle”
function is active.
“CD PROG” function
Selecting and confirming “CD
PROG” with the knob 22-fig. 1 will
display a numeric keypad fig. 25.
The “CD PROG” function is active only
when CD is stopped (“Stop”).
Use the knob 22-fig. 1 to select the
number of the track you want to add
to the programming sequence. Turn
the knob 22-fig. 1 to select the re-
quired number and then press it to
confirm.
“Scroll”
The “Scroll” function shall be used to
select the tracks not displayed.
fig. 24
F0D2012g
fig. 25
F0D2013g
024-053 Doblo Connect GB 15-06-2007 10:32 Pagina 38