68 Nero 603 83 540 Connect DOBLO GB
CONNECT Nav
68
“NEW VOICE COMMAND”: acti-
vates recording of a new voice sample.
Rotate and press the knob 22-fig. 1,
to select and confirm “NEW VOICE
COMMAND”;
– user is guided by appropriate mes-
sages and will have to pronounce twice
the name to be recorded;
“DELETE VOICE COMMAND”: al-
lows deletion of a previously record-
ed voice sample.
– Rotate and press the knob 22-fig. 1,
to select and confirm “DELETE VOICE
COMMAND”.
The system will display the follow-
ing confirmation screen: “PRESS EN-
TER TO CONFIRM, ESC TO CAN-
CEL”.
– pressing “ESC” 23-fig. 1 the display
goes back to previous screen and the
voice sample will not be deleted.
IMPORTANT This function is ac-
tive only if the concerned entry, in the
directory, is associated to a voice sam-
ple as described previously.
“LISTEN TO VOICE COMMAND”:
reproduces a previously recorded
voice sample.
– Rotate and press the knob 22-
fig. 1, to select and confirm “LISTEN
TO VOICE COMMAND”, the system
will reproduce the selected voice sam-
ple.
IMPORTANT This function is ac-
tive only if the concerned entry, in the
directory, is associated to a voice sam-
ple as described previously.
“OK”: confirm changes and stores
them in the directory.
IMPORTANT If the user after end-
ing these operations doesn’t select
“OK” and confirm by rotating the knob
22-fig. 1, new settings will not be
stored in the directory.
To Next Page
Loading...
