17
HANDS-FREE KIT WITH VOICE RECOGNITION AND
Bluetooth
®
WIRELESS TECHNOLOGY
SOUND SYSTEM
SCAN FUNCTION
(station scanning)
Keeping button SRC-SCN pressed until
the beep, starts scanning the stations in
the frequency band selected (FM, MW,
LW). Each station found will be heard for
a few seconds and the name and frequen-
cy will flash on the display.
If the TA function is on (traffic informa-
tion), the system will search only the sta-
tions that broadcast traffic bulletins. If the
PTY function is on, the system will only
search PTY stations.
When the Scan function is on, all the oth-
er functions are cancelled.
Press again button SRC-SCN to continue
to listen to a station selected during scan-
ning.
In any case the search function will be
turned off after scanning the frequency
band, even if no station is selected.
SCANNING PRESET STATIONS
Keep button MENU-PS pressed to start
scanning the preset stations in the present
frequency band.
Each preset station will be heard for a few
seconds and its name or frequency will
flash on the display. In passing from a pre-
selection to another, the display will show
the word “TUNER-PRESET-SCAN”.
If the TA function is on (traffic informa-
tion), the system will only search stations
that broadcast traffic bulletins.
When the Scan function is on, all the oth-
er functions are cancelled.
The Scan function is interrupted in the fol-
lowing cases:
❒
pressing again button MENU-PS;
❒
pressing button
N
or
O
(manual or au-
tomatic tuning starts).
If the TA function is on (traffic information),
the tuner only searches stations which
broadcast traffic bulletins.
If the PTY function is on, the tuner only
searches PTY stations. When searching,
the display alternatively shows the type of
programme and the word “SEARCH”.
MANUAL TUNING
This allows manual station searching in the
chosen band.
Select the required frequency band and
then press briefly and repeatedly button
¯
or
˙
to start searching in the chosen
band. Pressing one of the buttons
¯
or
˙
longer obtains fast forward searching,
which is stopped when the button is re-
leased.
In FM band if the AF function is on instead
of manual tuning, stations will be tuned
with RDS identification code (PI code).
To turn on manual tuning search it is nec-
essary to turn off the PTY and AF (alter-
native frequencies), if on.
To Next Page
Loading...
