23
HANDS-FREE KIT WITH VOICE RECOGNITION AND
Bluetooth
®
WIRELESS TECHNOLOGY
SOUND SYSTEM
SVC SETTING function
(volume changing with speed)
The SVC function makes it possible to au-
tomatically adapt the volume level to the
speed of the car, increasing it as the speed
increases to maintain the ratio with the
noise level inside the passenger compart-
ment.
To turn the function on/off use button
¯
or
˙
. The display will show the current
status of the function:
❒
“SVC SETTING: ON”: function on;
❒
“SVC SETTING: OFF”: function off.
CD NAMING function
(allocating a name to a CD)
Use the CD NAMING function to give a
name (max. name length = 8 characters)
to max. 30 CDs.
This function can be selected only if in
Compact Disc or CD Changer mode. To
turn this function on, use button
¯
or
˙
:
the display shows “CD NAMING FUNC-
TION”. If the CD already has a name, this
will be shown on the display, if not, eight
dashes will be shown. If storage is no
longer available for a new name, the dis-
play will show the first name stored.
To change the name or give a name to the
new CD press button
¯
or
˙
. Press the
buttons again to choose the position of
the character to be changed. Press but-
tons
N
or
O
to choose or change the
character.
To store the name, press button MENU-
PS again. The display will show “CD NAM-
ING FUNCTION”.
To clear a name, turn the function on and
press button 2-CLR for about 5 seconds.
The system beeps and the display shows
“ONE NAME DELETED”. At this point
the procedure can be started to give a
new name.
SENSITIVITY function
(tuner sensitivity adjustment)
With this function it is possible to change
the sensitivity of automatic station search-
ing. When low sensitivity “SENSITIVITY
LOCAL” is set only stations with excel-
lent reception are sought; when high sen-
sitivity “SENSITIVITY DISTANCE” is set
all stations are sought. Therefore, if the
car is in an area with a considerable num-
ber of stations and you want to choose
only those with a strong signal, set to low
sensitivity “SENSITIVITY LOCAL”.
To set the sensitivity, use button
¯
or
˙
.
The display will show the current status
of the function:
❒
“SENSITIVITY: LOCAL”: low sensitivity;
❒
“SENSITIVITY: DISTANCE”: high sen-
sitivity.
To Next Page
Loading...
