41
SOUND SYSTEM
HANDS-FREE KIT WITH VOICE RECOGNITION AND
Bluetooth
®
WIRELESS TECHNOLOGY
❒
After the general help message is fin-
ished, pronounce “Setup” and then
“Help”. The system will speak again
the list of voice commands available for
the Settings menu.
❒
You can then pronounce one of the
available commands and proceed with
the dialogue as you like.
❒
If you need further help, press
ô
and
pronounce again “Help”.
PAIR YOUR MOBILE PHONE
IMPORTANT Carry out this operation
only with the car stopped.
To pair your mobile phone, proceed as
follows:
❒
Press
ô
and pronounce “Setup” then,
at the end of the system message say
“Pairing”.
❒
The system will show the phone pair-
ing PIN number on the multifunction
display. For the next two steps, consult
your mobile phone owner’s manual
about Bluetooth
®
pairing.
❒
On your mobile phone, query for de-
vices equipped with Bluetooth
®
wire-
less technology (the setting on your
mobile phone might be called Discover
or New Device). In this list you will find
“My Car” (name identifying the hands-
free phone system installed on your
car): select it.
❒
When prompted by the mobile phone,
enter the PIN number shown on the in-
strument panel display using your mo-
bile phone keypad. If pairing is success-
ful, the system will say “Connecting”
and at the end, the message User pair-
ing saved will be displayed.
It is essential to wait until you see the mes-
sage User pairing saved on the display.
Pressing
ß
/MAIN or
&
/ESC before the
message is displayed may cancel the pair-
ing process. If the pairing process fails, an
error message will be displayed: in this
event repeat the pairing procedure.
❒
At first pairing, the system will say
“Welcome” immediately after con-
necting. This message will no longer be
heard at next pairing procedures.
To Next Page
Loading...
