76
SOUND SYSTEM
HANDS-FREE KIT WITH VOICE RECOGNITION AND
Bluetooth
®
WIRELESS TECHNOLOGY
PHONE-SPECIFIC: Nokia
®
Problem Probable Cause Possible Solution
Before establishing a connection with a
paired Nokia
®
mobile phone, the phone
display screen prompts with a confirmation
message (e.g.: “Accept connection
request”)
During an active phone call on the hands-
free phone system of the car, the
Bluetooth
®
wireless technology
connection is disconnected when pressing
button
SRC/OK
to switch the audio
output from the device to the mobile phone
Models: Nokia
®
6820, 6230, 7610 or 6600
While handling two phone conversations
via call waiting on a
Nokia
®
mobile phone,
when I press SRC/OK to transfer
audio
output to my mobile phone, only one
of the phone conversations is transferred
When I press
SRC/OK
to switch the audio
output of the phone conversation from
my Nokia
®
mobile phone to the hands-
free phone system, nothing happens
Nokia
®
mobile phones do not allow the
hands-free phone system to automati-
cally establish the Bluetooth
®
wireless
technology connection.
You must interact with the mobile phone
Pressing
SRC/OK
during an active phone call on this type
of phone disconnects the Bluetooth
®
wireless technology connection
The ability to transfer audio output for
two active phone conversations
to the mobile phone is not supported
by the system when paired with a
Nokia
®
mobile phone
–
On your mobile phone navigate
to “Connectivity” → “Bluetooth
®
”. Se-
lect the next menu using the key on the
right side. Select “My Car” and then
“Authorized”
The phone call is still active on the
mobile phone. If you wish
to reconnect and use the hands-free kit
again, press
ß
/MAIN
–
Press
ß
/MAIN or
ô
to reconnect the
phone conversation to the hands-free
feature
To Next Page
Loading...
