EasyManua.ls Logo

Fiat SCUDO - Front Seat Belts; Height Adjustment

Fiat SCUDO
324 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
103
Safety
5
Front seat belts
The front seat belts are tted with a pyrotechnic
pretensioning system and a force limiting
system.
This system improves safety in the front seats in
the event of a front or side impact.
Depending on the severity of the impact, the
pyrotechnic pretensioning system instantly
tightens the seat belts against the body of the
occupants.
The pyrotechnic pretensioning seat belts are
enabled when the ignition is on.
The force limiter reduces the pressure of the
seat belt on the chest of the occupant, thus
improving their protection.
Fastening
Pull the strap, then insert the tongue into the
buckle.
Check that the seat belt is fastened correctly
by pulling on the strap.
Unfastening
Press the red button on the buckle.
Guide the seat belt as it reels in.
Height adjustment
To lower the attachment point, while moving
control A downwards, slide the assembly down
to the desired position.
To raise the attachment point, slide the
assembly up to the desired position.
The upper part of the diagonal strap
should lie across the shoulder.
Two-seat front bench seat
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 103 14/02/2022 15:33:28

Table of Contents

Related product manuals