EasyManua.ls Logo

Fiat SCUDO - Page 163

Fiat SCUDO
324 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
161
Driving
6
(without automatic regulation of the inter-
vehicle safety distance).
Press buttons 2-SET- or 3-SET+: the current
speed becomes the speed setting (minimum
25 mph (40 km/h)) and the cruise control is
immediately activated.
Press 3 to increase or 2 to decrease the
speed setting (in steps of 5 mph (5 km/h) if the
button is kept depressed).
Pressing and holding either button
2-SET- or 3-SET+ results in a rapid
change in the speed of the vehicle.
Pausing/resuming cruise control
Press 4-II or depress the brake pedal. To
pause cruise control, it is also possible to:
Shift from mode D to N,
Depress the clutch pedal for more than 10
seconds.
Press the electric parking brake control.
Press 4-II to restart cruise control. Cruise
control may have been paused automatically:
When the inter-vehicle distance threshold is
reached.
When the distance between your vehicle and
the one in front becomes too short.
When the vehicle starts moving too slowly or
the vehicle in front starts moving too slowly.
When the ESC system is triggered.
When the driver attempts to reactivate
cruise control, after the function has been
paused, the message "Activation not possible,
unsuitable conditions" is briey displayed if
reactivation is not possible (safety conditions
not met).
Using the Road signs recognition function
or speed limit sign memorisation to
modify the speed setting.
Press 5-MEM to accept the speed setting
proposed by the system on the instrument panel
or touch screen, then press again to conrm.
To prevent any sudden acceleration or
deceleration of the vehicle, select a
speed setting fairly close to the current speed
of your vehicle.
Changing the inter-vehicle distance
Press 6 to display the distance setting
thresholds ("Distant", "Normal" or "Close"), then
press again to select a threshold.
After a few seconds, the option is accepted and
will be memorised when the ignition is switched
o󰀨.
Temporarily exceeding the speed setting
Depress the accelerator pedal. Distance
monitoring and cruise control are deactivated as
long as you continue to accelerate. The speed
on the instrument panel ashes.
Deactivating the system
Turn the knob 1 upwards into position 0
(OFF).
Information displayed on
the instrument panel
Head-up display
7. Cruise control pause/resume indication.
8. Indication of selection of cruise control mode,
or vehicle speed adjustment phase.
9. Speed setting value.
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 161 14/02/2022 15:33:39

Table of Contents

Related product manuals