182
Practical information
POWER CHARGE FAULT Symbol Description
(green)
(green)
Connected to the power supply and to the Electric
Vehicle (EV).
The EV is on charge or in a temperature pre-
conditioning sequence.
(green)
(green)
Connected to the power supply and to the Electric
Vehicle (EV).
The EV is waiting for charging or the charging of
the EV is completed.
(red)
Control unit malfunction. No charging allowed.
If an error indicator reappears after a manual
reset, the control unit must be checked by a Fiat
Dealership before the next charge.
(green)
(green)
(red)
The control unit is in diagnostic mode.
Manual reset procedure
The control unit can be reset by simultaneously disconnecting the charging connector and the wall socket.
Then, reconnect the wall socket rst. For more information, refer to the handbook.
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 182 14/02/2022 15:33:46
To Next Page
Loading...
