Fiat SCUDO - Bluetooth Audio Streaming; Information and Advice; Telephone

252
Bluetooth® audio system
Press and hold one of these buttons for
fast forward or rewind.
Bluetooth
®
audio streaming
Streaming allows music les on the telephone to
be played via the vehicle's speakers.
Connect the telephone.
(Refer to the "Pairing a Bluetooth® telephone"
section).
Activate the streaming source by pressing
SOURCE.
In certain cases, playback of the audio les must
be initiated from the keypad.
Audio les can be selected using the buttons on
the audio system control panel and the steering-
mounted controls. The contextual information
can be displayed on the screen.
If the telephone supports the function. The audio
quality depends on the quality of transmission by
the telephone.
Connecting Apple
®
players
Connect the Apple
®
player to the USB socket
using a suitable cable (not supplied).
Play starts automatically.
Control is via the audio system.
The classications available are those of the
portable device connected (artists / albums /
genres / playlists).
The version of software in the audio system may
not be compatible with the generation of your
Apple
®
player.
Information and advice
The CD player can play audio les with “.mp3”,
“.wma”, “.wav” and “.aac” le extensions, with a
bit rate of 32 to 320 Kbps.
It also supports TAG mode (ID3 tag, WMA TAG).
No other le types (".mp4", etc.) can be read.
Files of the ".wma" type should be to the wma 9
standard.
The sampling rates supported are 11, 22, 44 and
48 kHz.
Via the USB socket, the system can play audio
les with the extension “.mp3”, “.wma”, “.wav”,
“.cbr”, “.vbr" with a bit rate of 32 to 320 Kbps.
No other le types (".mp4", etc.) can be read.
Files of the ".wma" type should be to the wma 9
standard.
The sampling rates supported are 11, 22, 44 and
48 kHz.
File names should have fewer than 20
characters, avoiding special characters (e.g.
« ? ; ù) so as to avoid any reading or display
problems.
In order to be able to play a burned CDR or
CDRW, select ISO 9660 standards level 1, 2, or
Joliet, if possible, when burning the CD.
If the disc is burned in another format, it may not
be played correctly.
It is recommended that the same burning
standard always be used on an individual disc,
with the lowest speed possible (4x maximum) for
the best acoustic quality.
In the particular case of a multi-session CD, the
Joliet standard is recommended.
To protect the system, do not use a USB hub.
Only use USB memory sticks formatted
to FAT 32 (File Allocation Table).
It is recommended that you use genuine
Apple
®
USB cables to guarantee correct
operation.
Telephone
Pairing a Bluetooth
®
telephone
As a safety measure and because it
requires sustained attention by the driver,
the pairing of a Bluetooth
®
mobile telephone
with the Bluetooth
®
hands-free system of your
audio system must be done with the vehicle
stationary and the ignition on.
Activate the telephone's Bluetooth
®
function and ensure that it is "visible to
all" (telephone conguration).
Fiat.K0-Fiat-VP.2021.01.en-GB.indb 252 14/02/2022 15:34:04