Positioning the load platform on the
lower level
The load capacity can be further
extended by lowering the luggage
compartment surface as follows:
lift the load platform 1 using the
specific handle 2 fig. 57;
extract the load platform from the
luggage compartment;
place it back in the luggage
compartment being careful to rest it on
the lower level fig. 59 and not the upper
level 1.
To move the load platform to upper
level, proceed as follows:
lift the load platform 1 using the
specific handle 2;
extract the load platform from the
luggage compartment;
place it back in the luggage
compartment making it rest on the
upper level 1fig. 59 to make the
threshold of the load platform flat
fig. 60.
SIDEBOARDS
TIPO STATION WAGON version
Two sideboards 1 (one per side)
fig. 61 are present by the side of the
load platform.
Simply pull it upwards to remove them
from the housing in which they are
accommodated.
To insert them, make the part 1 of the
sideboard fig. 62 with the slot 2 of the
housing fig. 63 in which it must be
placed and make is slide downwards.
59
P2000116
60
P2000112
61
P2000119
62
P2000120
63
P2000121
39
To Next Page
Loading...
