FibroPool FH235-I - Page 2

WARNING!
Risk of electric shock!
- A faulty electrical installaon or excessively high voltage can lead to electric shock.
- Installaon of heat pumps should only be performed by an authorized technician.
- Always disconnect the power supply before opening the heat pump for maintenance or repairs.
- Do not connect the heat pump if the incoming voltage does not match the required voltage on the
unit’s informaon plate.
- Do not operate the heat pump if there is visible damage to the incoming wiring.
- Repairs should only be performed by a quali#ed technician unless otherwise instructed. Liability and
warranty claims are excluded in the event of improper repairs.
- Keep children away from the heat pump.
- Ensure that the heat pump’s wiring is properly grounded or bonded before operang.
ATTENTION!
- The manufacturer is not responsible for damage caused by people, foreign objects, or inappropriate
installaon against these guidelines.
- Always provide proper venlaon and install away from any #re risks.
- Do not disconnect or a*empt repairs on any lines containing refrigerant. Refrigerant repairs should
not be performed in any con#ned space.
- It is vital to follow proper winterizaon procedures when the risk of hard freeze approaches, or the
tanium heat exchanger risks being cracked or damaged. Such damage is not covered under the
warranty and repairs will be the owner’s responsibility.