14
SECURITY BREACH
Your ATRIUS safe has undergone stringent tests in independent testing laboratories to comply
with the EN1143-1 burglary. It has been granted corresponding certificate by international
certification body (A2P).
A2P safety labels affixed in the door back plate is your guarantee that the ATRIUS safe has
successfully passed these testing.
However, you must be aware that: ANY MODIFICATIONS SUBSEQUENT
TO
MANUFACTURE, SUCH
AS:
Replacing an existing lock by a lock which does not carry the same reference or
Replacing an existing lock by another lock not certified for the ATRIUS range,
Any modification to the construction (fire seal removal, drilling extra holes through the body or
the door for compressed air feeding, ventilation, fixing…)
Any modifications to the rod assembly whatever the nature or extent,
OR ANY OTHER INCIDENT BREACHING THE SECURITY OF
YOUR
PRODUCT SUCH
AS:
Fire,
A ttempt to break in, forcing…
RESULTS IN THE IMMEDIATE UNVALIDITY OF THE
SAFE’S
CERTIFICATION
AS A CONSEQUENCE, YOU MAY NOT BE
INSURED.
If you believe your safe has undergone any damage, we advise you
to
immediately
contact your usual retailer for further
advice.
SAFETY RECOMMENDATIONS
If you have ordered a safe with a mechanical or electronic combination, it is necessary to
change the combination code after commissioning of the safe. It is advised to renew this
operation at least once a year.
For detail on mechanical or electronic combination locks, refer to the specific lock user manual
included with your safe.
If your safe is equipped with a key lock and you lose a key, you are strongly advised to replace
the lock
.
To Next Page
Loading...
